campingflow.blogg.se - Speed up mac for games

#SPEED UP MAC FOR GAMES DRIVER#

Improper or defective SATA cable will hamper the performance of the SSD. Sometimes your external SSD will perform slowly when the SATA cable connection is not proper. Use a 6Gbps SATA controller to ensure the high speed of the SSD. Most of the motherboards will have 3 and 6Gbps SATA ports. The speed of your external SSD may get reduced when you choose the wrong SATA port. Select SSD as a preferred boot device followed by USB and DVD Drive.Reboot your computer and enter into BIOS mode.You can configure your boot sequence with the following sequence. Improper sequence of boot order may affect the performance of your SSD hard drive. Enter into BIOS mode by restarting your computer.This can be avoided by disabling the Onboard VGA option using the following steps. Sometimes using Onboard VGA may affect the performance of the SSD. Locate On-chip SATA Type in the boot menu and enable AHCI.You can enable AHCI from BiOS settings.If you can’t locate the AHCI controller you have to enable it manually.If the AHCI controller is available on the list and enabled.Access device manager from the control panel.If your drive is slow, it is better to ensure that your AHCI is enabled with the following procedure. Select the “defragment disk” option to merge fragmented files.ĪHCI mode should be enabled to get the best out of your SSD hard drive.Select the “Analyze disk” option to analyze fragmented percentages.Right-click on the SSD and select properties menu.You can delete junks with the following steps. You can clean up your drive by optimizing it. The memory space of Solid-state drives gets filled up with unwanted junk files and fragmented files as we keep on using it.

#SPEED UP MAC FOR GAMES DRIVER#

Type “fsutil behavior query DisableDeleteNotify0” in the command prompt to enable the TRIM command.Īn optimized driver can enhance your system performance.But if you get “1” the TRIM command is not activated.TRIM command is activated already if you get “0” as a reply.Give “fsutil behavior query DisableDeleteNotify” as input in the cmd.Type ‘CMD’ in the run tab to open the command prompt.

Invoke the Run tab from the start menu.

With the following steps, you can ensure that the TRIM command is enabled on your computer. If you find your SSD to be slow, the first thing you should check is the TRIM command. TRIM command will help you in removing unused data from your SSD. Trim command is necessary for the smooth performance of your solid state drive.